How To Improve The Operational Safety Of Construction Machinery ?

Construction machinery plays an irreplaceable role in the construction of presentation, and any large-scale work cannot be separated from construction machinery. However, due to the large size, as well as the design of the problem, sometimes the driver in the operation of the blind zone around the real-time situation is difficult to detect, if a worker suddenly into the blind zone is operating within the scope of the accident, it is easy to cause injuries. This article will introduce to improve the operation safety by retrofitting configuration.

 

1. 360 Panoramic Image System

 

The 360 panoramic surround view system installs a high-definition wide-angle camera on each side of the construction machinery to collect data around the vehicle, and ultimately presents a high-definition 3D surround panoramic work picture on the display. When a construction vehicle is working close to a set risk area, the system's AI algorithm will immediately capture the person and display a colourful warning on the display, a voice prompt will remind the driver inside the vehicle, and an acoustic and visual alarm outside the vehicle will broadcast ‘Blind Zone, Dangerous, Please Stay Away’.

 

 

2. Reversing Buzzer

 

Reversing buzzer is a kind of acoustic device installed on the construction machinery, which can make a sharp sound to remind the surrounding people when the machinery is reversing. Because of the blind spot in the rear-view mirror of the construction machinery, it is difficult to observe the surrounding environment completely and accurately, and the reversing buzzer can remind others through the sound, increasing the safety factor.

 

 

3. Front Windscreen Guard

 

The installation of front windscreen guard can effectively protect the safety of the driver. It prevents splashes from hitting sensitive areas such as the driver's face, eyes and ears, and also reduces damage to construction machinery, especially the front windscreen, protecting the normal operation of the machine as well as reducing maintenance costs.