TENHUN TH215C 21.2 Tons Excavator For Chile

Customers in Chile found us through recommendations from local customers and asked about excavator prices. After communicating with the customer, we learned that the customer used it for project construction. Therefore, we recommended the TENHUN TH215C 21.2 Tons Excavator to our customers. The excavator has stable performance and efficient operating performance. Very suitable for local use by customers. The customer is also very satisfied with the configuration of this excavator. He immediately decided to buy from us and quickly paid the deposit. The factory has now started production.

 

 

The TENHUN TH215C excavator is equipped with a new air-conditioning system, which optimizes the air-conditioning ducts, provides stronger cooling effect, and more reasonable air volume distribution. The air conditioner evaporator enables in-car cleaning and maintenance, making cleaning easier. Configurations such as delayed extinguishing of lights when shutting down at night, one-touch switching of front and back display screens, and rear cameras ensure driving safety.

 

 

The TENHUN excavator is equipped with an earthmoving bucket as standard and an optional rock bucket to achieve "one bucket for one condition" to meet the needs of different working conditions.Optimize the bucket shape to increase material penetration smoothness and reduce friction. The angle between the front blade plate and the support bottom plate increases, which improves the bucket full rate. The average resistance during the excavation process is reduced and the excavation efficiency is increased.

 

 

Regarding the daily maintenance of the excavator: Change the oil and filter: According to the manufacturer's recommendations, replace the oil and filter every 500H to maintain the good running condition of the engine. Check and replace hydraulic oil: The hydraulic system is the core part of the excavator. The quality and quantity of the hydraulic oil should be checked regularly and replaced when necessary. If a breaker is installed, the replacement cycle should be shortened to ensure the normal use of the hydraulic system.